![]() Step Five : Click next – you should see “STM32_Med-density_128K”.īut I get STM32F1_Med-density_64K (also in earlier step it detects 64K flash instead of 128K flash as in the guide. so i was thinking that i could get my board back into the default fairmware by flashing an openpilot bin file, but i can't find it anywhere and im not interested in using anything else than openpilot gcs. The only difference I noticed when flashing is that the guide says I should get it seems like you can still flash different firmware versions onto the board by manually selecting a bin file from your archive. I double checked, the SBL and/+3.3V pins are not bridged (that would send it into bootloader mode) Also Windows will not recognize the device when connected via usb. I get a steady green light, same as with no software/bootloader mode only. ![]() ![]() However, after plugging usb I don't get blinking blue light which would suggest that the software is loading. I did every step exactly as in the guide, and my flash was verified successfully. I just flashed cleanflight via FTDI adapter using this very guide that has been recommended by some fellow users on this sub:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
June 2023
Categories |